NGFF - M.2 (NGFF) Connector, Series 8200


Xmultiple NGFF Connectors are the best way to have one supplier for all your connector needs.

M.2 (NGFF) is the new form factor for Ultrabooks, Tablets, and PCs. NGFF was invented for PCI-SIG by Intel and it is developed for flat and high-efficiency equipment. The multiple function such as Wi-Fi, BluetoothR, and SSD is covered as one card. This is a multi-function card and this multiple function card supports high speed signal integrity such as USB3.0 and SATA3.0.

Xmultiple's NGFF series is a small size card edge connector for mobile devices. The NGFF series has significant space savings compared to previous technologies in both board space and height.

NGFF provides the standard interface for solid state drives (SSD) and various wireless cards supporting Wi-FiR, NFC, BluetoothR, GNSS, and WWAN. Please call for the options for the NGFF series which is available in multiple heights and key options. All Xmultiple NGFF connectors accommodate various card types, and are lead-free and halogen-free. NGFF series connectors are an alternative for PCIe Mini and Half Mini card connectors.

Key Specifications/Special Features:

  • The M.2 product line is a natural transition from the mini card and half mini card to a smaller form factor in both size and volume
  • It supports multiple function add-in cards/modules including: Wi-Fi, Bluetooth, global navigation satellite systems, near field communication, Hybrid digital radio, wireless gigabit alliance (WiGig), wireless wide area network and solid-state storage devices
  • It also adds functionality to PCIe Gen 3, SATA 3, SATA I/O and USB 3
  • The new smaller form factor is suitable for applications in new thin platforms

Key features:

  • Available in various heights
  • 0.5mm pitch with 67 positions
  • Designed for both single and double-sided modules
  • Available in various keying options for module cards
  • Supports PCI Express 3.0, USB 3.0 and SATA 3.0

Applications:

  • Notebooks, ultrabooks and desktops
  • Tablets
  • Servers
  • Portable gaming devices
  • Devices that require SSDs
  • Portable mobile devices

Xmultiple has developed various variations of M.2 (NGFF) connector which supports various heights and the various ¡¥keying¡¦ for each card. Call for the card for your requirement.

Compatible to USB 3.0, SATA 3.0 and PCI Express 3.0

XNGFF-8250 Drawing

XNGFF-8140 Drawing

Call for Drawings 1-805-579-1100

Other Products Related:

UltraMag/XMJax 10GBase-T Presentation

Women are the Main Users Of Mobile Devices - Xmultiple X-SMART addesses the features they want on these devices

 

*Intel and Ultrabook is the registered or a registered trademark of Intel Corporation
*Wi-Fi is the registered or a registered trademark of Wi-Fi Alliance.
*Bluetooth is the registered or a registered trademark of Bluetooth SIG Inc.
*PCIe is the registered or a registered trademark of PCI-SIG.

 

3xN Power RJ45 Stackables for High Density

The XMJax is the highest density RJ Connectors in the marketplace. The XMJax Stacked Modular Jacks are provided with low profiles, which will allow them to be used with less space. This stacked jacks are provided with and without magnetics and are available with or without shielding panel ground. The XMJax is patent pending.

2xN Power Over Ethernet RJ45 with Gigabit and 10/100Mbps

XRJH and XMH Series of connectors from XMULTIPLE. The XRJH Series of 10/100 Base-TX and XMH Series of Gigabit Stackable RJ45 2xN with or without LEDs integrated magnetics designed to support applications such as Switches, Hubs and Power over Ethernet switch/hub systems.

XMH-YL PoE 2xN Series DataSheet

 

 

 

 

UtraJax Connectors Double Pin Count Capacity

Our patented UltraJAX is an one RJ connector which equals two RJ connectors. Visit our product website www.ultrajax.com for complete information on this evolutionary product.

UltraJax provides a high density contact capability with a standard RJ connector. Contact assemblies are housed in both the top and the bottom of the Ultrajax RJ Connector. Existing RJ11 and RJ45 Connectors insert into the connector in more than one direction supporting more than one use for the connector. Ultrajax is the first major innovation in RJ connectivity. Please visit our Ultrajax product website.

SFP Fiber Optic / Copper SFP & SFP Plus

The XSFP connectors are compact hot-pluggable optical transceivers which are designed to be used in optical communications for both data and telecom applications. Our XSFP connectors assemble to printed circuit boards for switches, routers and interface these devices to a fiber optic or unshielded twisted pair networking cable.

XM Connectors Resources Company Compliance/Other
RJ Connectors Brochures & Catalog About Us Product Compliance - AODA
RJ Magnetic Connectors Datasheets Events Quality
RF Connectors Cross-Reference Careers RoHS
USB / eSATA / HDMI Industries Press Room UL
Fiber Optic Support Center Investors REACH
Board to Board / FFC-FPC Design Center / Tools Core Comp ISO 9001:2008
Terminal Block / Socket Terms Privacy / Legal Disclaimer
Lighting Products Literature / Glossary Patents Sample Approval Form
Find Inventory New Products Approved Vendor List Checklist
Components / More Sitemap Social Media / Links Home
   Connect with Xmultiple

 

   

 

 
 


































 



Need A Stock Check ?